International Association for Cryptologic Research

International Association
for Cryptologic Research


Hülya Evkan

Affiliation: Fraunhofer SIT, Darmstadt, Germany


ISA Extensions for Finite Field Arithmetic: Accelerating Kyber and NewHope on RISC-V 📺
We present and evaluate a custom extension to the RISC-V instruction set for finite field arithmetic. The result serves as a very compact approach to software-hardware co-design of PQC implementations in the context of small embedded processors such as smartcards. The extension provides instructions that implement finite field operations with subsequent reduction of the result. As small finite fields are used in various PQC schemes, such instructions can provide a considerable speedup for an otherwise software-based implementation. Furthermore, we create a prototype implementation of the presented instructions for the extendable VexRiscv core, integrate the result into a chip design, and evaluate the design on two different FPGA platforms. The effectiveness of the extension is evaluated by using the instructions to optimize the Kyber and NewHope key-encapsulation schemes. To that end, we also present an optimized software implementation for the standard RISC-V instruction set for the polynomial arithmetic underlying those schemes, which serves as basis for comparison. Both variants are tuned on an assembler level to optimally use the processor pipelines of contemporary RISC-V CPUs. The result shows a speedup for the polynomial arithmetic of up to 85% over the basic software implementation. Using the custom instructions drastically reduces the code and data size of the implementation without introducing runtime-performance penalties at a small cost in circuit size. When used in the selected schemes, the custom instructions can be used to replace a full general purpose multiplier to achieve very compact implementations.
Polynomial Multiplication in NTRU Prime: Comparison of Optimization Strategies on Cortex-M4
This paper proposes two different methods to perform NTT-based polynomial multiplication in polynomial rings that do not naturally support such a multiplication. We demonstrate these methods on the NTRU Prime key-encapsulation mechanism (KEM) proposed by Bernstein, Chuengsatiansup, Lange, and Vredendaal, which uses a polynomial ring that is, by design, not amenable to use with NTT. One of our approaches is using Good’s trick and focuses on speed and supporting more than one parameter set with a single implementation. The other approach is using a mixed radix NTT and focuses on the use of smaller multipliers and less memory. On a ARM Cortex-M4 microcontroller, we show that our three NTT-based implementations, one based on Good’s trick and two mixed radix NTTs, provide between 32% and 17% faster polynomial multiplication. For the parameter-set ntrulpr761, this results in between 16% and 9% faster total operations (sum of key generation, encapsulation, and decapsulation) and requires between 15% and 39% less memory than the current state-of-the-art NTRU Prime implementation on this platform, which is using Toom-Cook-based polynomial multiplication.